REDESIGN LAYOUT WORKSTATION PROSES INJECTION MOLDING BERDASARKAN WORKLOAD ANALYSIS DAN PROSES SIMULASI PADA PEMBUATAN KOMPONEN LCDTV

Fajar Mulyana, Sugiono Sugiono, Ishardita Pambudi Tama

Abstract


Abstract Productivity improvement of the company can be reach with many effort, which are minimizing waste, improving the utility of operator, and also redesigning layout facilities. Based on the observation, idle time of operator for the injection process is 30 minutes. If the delay will be compare with the company losses, it is equal to IDR. 1.001.700/operator/month. Based on this problem, redesign of the facilities layout is a solution to improve utilities and workload of operator. The result of this research, alternative layout has design based on simulation and the analysis of Activity Relationship Chart (ARC). It could be minimized the material handling 49.4 meters and 42.9 seconds. For the financial analysis, it can be minimized the labour cost IDR 14.684.670/month and also the material handling cost at least IDR 54.262/month.


Keywords


ARC; Financial Analysis; Productivity Improvement; Layout Facilities; Redesign

Full Text:

PDF

References


Albertus Pasca Yudawan. 2011. Penataan Tata Letak Pabrik Asesoris Mobil Berbahan Polimer Pada PT.FLN Dengan Metode Systematic Layout Planning,

Harper.Charles A. Harper. 2006. Handbook of Plastic Processes, John Wiley and Son, Inc., Publication

Lilik Rohmatin. 2005. Evaluasi Layout Dengan Metode Analisis Beban Jarak dan Waktu Pada Perusahaan Plastik Burung

Mas Surakarta,

Ridwan Arief. 2011. Penataan Analisa Beban Kerja dan Jumlah Tenaga Kerja Yang Optimal Pada Bagian Produksi Dengan Pendekatan Metode Work load Analysis (WLA) Di PT.Surabaya Perdana Rotopack, Jurusan Teknik Industri Universitas Pembangunan Nasional “V n” J w Timu

Piqih Nurjannah. 2009. Penentuan Jumlah Tenaga Kerja Berdasarkan Waktu Standar Dengan Metode Work Sampling Di

Bagian Packing Pada PT.Sinar Oleochemical International, Teknik

Industri Universitas Sumatera Utara

Widhi Wahyani & Nofan Hadi Ahmad. 2010. Analisis Bottle Neck Dengan Pendekatan Simulasi ARENA Pada Produk Sarung Tenun Ikat Tradisional.

Renata Maywanto Siregar, dkk. 2015 Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Menerapkan Algoritma Blocplan dan Algoritma Corelap Pada Perusahaan Televisi




DOI: https://doi.org/10.21776/ub.jemis.2015.003.02.6

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.