SIX SIGMA IMPLEMENTATION IN INDONESIA INDUSTRIES AND BUSINESSES: A SYSTEMATIC LITERATURE REVIEW

Sugiri Widjajanto, Humiras Hardi Purba

Abstract


Understanding quality in manufacturing starts with defect identification and improvement finding. Reliability that influenced by equipment design or working methods or environment has led to concept of improvement with six sigma method and this has been absorbed in Indonesia industries as well. This article discusses about six sigma implementation in Indonesia from various business and industries. The method is to review research articles that are published within 2016-2020 with keyword DMAIC and six sigma. The results from 52 selected articles is obtained average 3.68 sigma value of Indonesia industries within year 2016-2020 with the least value 1.10 from crude palm oil refinery and the highest is 5.10 from bagging process of sugar refinery. However, six sigma application is not always satisfying  concerning its suitability function, requirement of industries, culture, local regulation, and internal business concern, especially in terms of efficiency and cost. Future research is suggested utilizing industry 4.0 concept to enhance six sigma implementations.

Keywords


Six sigma; DMAIC; Indonesia

Full Text:

PDF

References


Julian Syaputra M, Purwanto A, Septiadi R, Kartika H, Dimas Puja Kusuma R, Haris M. Does Smes Need Lean Six Sigma ? Anwer From Indonesian Smes During Pandemic Covid-19. J. Crit. Rev. 2020;7:2020.

Setiawan D, Purwanto A, Maryani E, Fauziah Y, Kartika H, Lumbantobing JP, et al. Does Six Sigma Implementation Suitable for Smes ? an Exploratory Study From Indonesia. J. Crit. Rev. 2020;7:2020.

Ompusunggu AP, Viosita L, Mahardini KA. The Effect of Preventive Maintenance Scheduling on Reliability Machine in PT Indonesia Toray Synthetics (ITS). J. Critcal Rev. 2020;7:841–5.

Praharsi Y, Jami’in MA, Suhardjito G, Wee HM. Six sigma implementation and analysis-An empirical study of a traditional boat building industry in Indonesia. In: Proceedings of the International Conference on Industrial Engineering and Operations Management. 2020. page 3092–100.

Rawendra RDS, Puspita VO. Use of Six Sigma Methods to Reduce Packaging Defect in Sweetened Condensed Milk Sachets: A Case Study in XYZ Milk Industry, Indonesia. IOP Conf. Ser. Earth Environ. Sci. 2020;426:0–10.

Lestari DP, Dachyar M. Improvement of service quality for customer satisfaction with lean six sigma method and development quality function deployment. Case: Telecommunication company in indonesia. Int. J. Adv. Sci. Technol. 2020;29:3605–13.

Indrawati S, A’Azzam E, Adrianto E, Miranda S, Prabaswari AD. Lean Concept Development in Fast Food Industry Using Integration of Six Sigma and TRIZ Method. IOP Conf. Ser. Mater. Sci. Eng. 2020;722:0–6.

Puspa Wirani A, Santoso Saroso D, Hardi Purba H. Innovation of quality improvement to reduce weld defect through six sigma methods in the fabrication process of power plant component. IOP Conf. Ser. Mater. Sci. Eng. 2020;852:012064.

Darmawan A, Bahri S, Putra ATB. Six Sigma Implementation in Quality Evaluation of Raw Material: A Case Study. IOP Conf. Ser. Mater. Sci. Eng. 2020;875:0–7.

Saryanto, Purba HH, Trimarjoko A, Fatahillah F. Quality improvement of remanufacturing lift arm using six sigma methods in the heavy-duty industry in Indonesia: A case study. Oper. Res. Eng. Sci. Theory Appl. 2020;3:24–38.

Bakti CS, Kartika H. Analisa pengendalian kualitas produk ice cream dengan metode six sigma. J. Ind. Eng. Manag. Res. 2020;1:63–9.

Bustmoy A, Rochmoeljati, Iriani. Analisis Kualitas Produk Keramik Untuk Meningkatkan Kualitas Dengan Metode Six Sigma Dan Kaizen Di Pt. Xyz. J. Manaj. Ind. dan Teknol. 2020;01:152–61.

Suwarni S, Novembrina M. Six Sigma Untuk Perbaikan Layanan Resep Di Rs X Kota Semarang. Parapemikir J. Ilm. Farm. 2019;8:89.

Artadi R, Syah TYR. Lean Service Design in Purchasing Order of Motorcycles : Case Study at Mandiri Utama Finance Branches Tangerang , Indonesia. J. Multidiscip. Acad. 2019;01:1–5.

Trimarjoko A, Saroso DS, Purba HH, Hasibuan S, Jaqin C, Aisyah S. Integration of nominal group technique, Shainin system and DMAIC methods to reduce defective products: A case study of tire manufacturing industry in Indonesia. Manag. Sci. Lett. 2019;9:2421–32.

Rinawati DI, Andini AR, Sari DP. Improving quality for plate assembly of drum brake using six sigma method. AIP Conf. Proc. 2019;2114.

Yuliyono AD, Baehaki, Luqman D, Utama DN, Wibowo A. Six Sigma Based Performance Measurement of Tax Return Processing Improvement (Case Study: Directorate General of Taxes for Republic of Indonesia). IOP Conf. Ser. Mater. Sci. Eng. 2019;598:0–8.

Ulfah M, Trenggonowati DL, Ekawati R, Ramadhania S. The proposed improvements to minimize potential failures using lean six sigma and multi attribute failure mode analysis approaches. IOP Conf. Ser. Mater. Sci. Eng. 2019;673:0–7.

Hernadewita H, Ismail M, Nurdin M, Kusumah L. Improvement of magazine production quality using Six Sigma method : case study of a PT.XYZ. J. Appl. Res. Ind. Eng. 2019;6:71–9.

Henny H, Agnia N, Hardianto H. Analysis Quality Control of Carded and Combed Yarns Using Six Sigma Method. IOP Conf. Ser. Mater. Sci. Eng. 2019;662:0–8.

Juniarti AD, Wirawati SM, Gandhi HK. Analysis of Quality Control of Steel Plate Products with Six Sigma Method at PT. Krakatau Posco. In: 1st International Multidisciplinary COnference on Education, Technology and Engineering (IMCETE 2019). 2019. page 135–40.

Pangestu P, Fahma F. Implementasi Six Sigma dalam Peningkatan Kualitas Proses Produksi LED TV di PT Sharp Electronics Indonesia. PERFORMA Media Ilm. Tek. Ind. 2019;17:152–64.

Adriyanti DW, Vanany I. Application Six Sigma Method in Green Leaf Threshing Tobacco Plant. IPTEK J. Proc. Ser. 2019;0:97.

Sari RM, Nugraha E. Strategi Operasi Berbasis Lean Six Sigma Sebagai Usaha Peningkatan Service Level. Organum J. Saintifik Manaj. dan Akunt. 2019;2:25–36.

Fatma NF, Pradipta SA. Penerapan Methodology Six Sigma Untuk Mengurangi Pemborosan Biaya Operasional Waste Water Treatment Di Pt Clariant Indonesia (Studi Kasus Di Perusahaan Kimia). J. Ind. Manuf. 2018;3:59–66.

Decky Antony K, Munzir T. Defect Rate Analysis Of Welding And Its Control Using Six Sigma And Fmea Methods In PT. Profab Indonesia. Dimensi 2018;7:162–74.

Aziza N, Afandi M. Analisis Defect Dan Kualitas Produk Writing and Printing Paper Dengan Six Sigma. Tek. Eng. Sains J. [Internet] 2018;2:73–8. Available from: https://e-journal.umaha.ac.id/index.php/teknika/article/view/266

Yurim Zagloel T, Ardi R, Poncotoyo W. Six sigma implementation model based on critical success factors (CSFs) for Indonesian small and medium industries. In: MATEC Web of Conferences ICIEE2018. 2018.

Purnama DA, Shinta RC, Helia VN. Quality improvements on creative industry by using Six Sigma: A study case. In: MATEC Web of Conferences ICET4SD-2017. 2018.

Nelfiyanti N, Rani AM, Fauzi A. Implementasi Six Sigma untuk Perbaikan Kualitas Produk Kiwi Paste Berdasarkan Keluhan Pelanggan. J. Sist. dan Manaj. Ind. 2018;2:41–50.

Putri NT, Gunawan A, Sutanto A. The consequences of Lean Six Sigma on Banking Improvement: A study at a front-line unit of a Bank Company in Indonesia. Adv. Hum. Side Serv. Eng. 2018;601:3–10.

Syahputri K, Sari RM, Anizar, Tarigan IR, Siregar I. Application of lean six sigma to waste minimization in cigarette paper industry. IOP Conf. Ser. Mater. Sci. Eng. 2018;309:0–6.

Wijaya AJ, Trusaji W, Akbar M, Ma’Ruf A, Irianto D. Improving Quality of Shoe Soles Product using Six Sigma. IOP Conf. Ser. Mater. Sci. Eng. 2018;319:0–6.

Kristanto W, Wiguna IPA. Defect Analysis of Building Construction Works Building in Surabaya with Six Sigma Method. Int. J. Innov. Sci. Res. Technol. 2018;3:600–9.

Kusumawati A, Fitriyeni L. Pengendalian Kualitas Proses Pengemasan Gula Dengan Pendekatan Six Sigma. J. Sist. dan Manaj. Ind. 2017;1:43.

Nurcahyo R, Apdillah R, Yadrifil. Application of Lean Six Sigma and Theory of Inventive Problem Solving to Reduce Waste and Improve the Quality Motorcycle Rear Arm. J. Asian Sci. Res. 2017;7:176–86.

Syafwiratama O, Hamsal M, Purba HH. Reducing the nonconforming products by using the six sigma method: A case study of a polyester short cut fiber manufacturing in Indonesia. Manag. Sci. Lett. 2017;7:153–62.

Rimantho D, Hernadi D, Cahyadi B, Prasetyani R, Kurniawan Y. The application of six sigma in process control of raw water quality on pharmaceutical industry at Indonesia. Int. J. Appl. Eng. Res. 2017;12:848–60.

Kurniawan W, Sugiarto D, Saputera R. Usulan Penerapan Metode Six Sigma Untuk Meningkatkan Mutu Crude Palm Oil (CPO) Di PT. X. J. Ilm. Tek. Ind. 2017;5:85–91.

Rimantho D, Hanantya MW. Enhancing the management of the noise level using six sigma method: A case study on the machining industry. IOP Conf. Ser. Mater. Sci. Eng. 2017;277:0–9.

Sirine H, Kurniawati EP. Pengendalian kualitas menggunakan metoda six sigma (Studi Kasus pada PT Diras Concept Sukoharjo). AJIE-Asian J. Innov. Entrep. 2017;02:254–90.

Jihan Shofa M, Gunawan H. Implementasi Six Sigma untuk Perbaikan Produk Nickel Pig Iron. J. Sist. dan Manaj. Ind. 2017;1:29.

Tejaningrum A. Quality culture and capabilities process supply chain of SMEs. Int. J. Organ. Innov. 2016;6:1689–99.

Rimantho D, Cahyadi B. Six Sigma method approach in the prevention of occupational accidents on the solid waste collector in South Jakarta. ARPN J. Eng. Appl. Sci. 2016;11:10014–22.

Widyanesti S, Fadhlillah I. Measurement cargo shipment quality through the Unit Load Device (ULD) PT. Garuda Indonesia SBU cargo using six sigma method. Int. J. Econ. Manag. 2016;10:223–33.

Sanny L, Novita S, Scherly, Novela S. Product quality development analysis with six sigma method: Case of SME tofu production in Indonesia. Pertanika J. Soc. Sci. Humanit. 2016;24:155–68.

Kusnadi A, Yudoko G. COntractor work preparation process improvement using lean six sigma, a case study of a global oiland gas company in Indonesia. South East Asian J. Manag. 2016;10:1–30.

Hakim IM, Zagloel TYM, Wulandari A. Framework Study on Single Assembly Line to Improve Productivity with Six Sigma and Line Balancing Approach. Int. J. Ind. Manuf. Eng. 2016;10:1748–53.

Parhusip A, Hartono F, Siray M, Mulyanto R. Draw point construction improvement at Deep Mill Level Zone (DMLZ) PT Freeport Indonesia using six sigma method. In: 2016 SME Annual Conference and Expo: The Future for Mining in a Data-Driven World. 2016. page 304–9.

Mastur HI, Aji NF. Analisis Pengendalian Kualitas Pembuatan Wellhub Dengan Pendekatan Lean Six Sigma. Teknoin 2016;22:44–52.

Ilyasa MAR, Bernik M, Harsanto B. Implementation of Six Sigma Method in Small and Medium Enterprises (SMEs), Case Study on CV . Berkah Abadi. J. Bisnis Manaj. 2016;XVII:3–12.

Fatkhurrohman A, Siliwangi J, Rawa N, Bekasi P, Indonesia T. Penerapan Kaizen Dalam Meningkatkan Efisiensi Dan Kualitas Produk Pada Bagian Banbury PT Bridgestone Tire Indonesia. J. Adm. Kant. 2016;4:14–31.

Mayr A, Weigelt M, Kühl A, Grimm S, Erll A, Potzel M, et al. Lean 4.0 - A conceptual conjunction of lean management and Industry 4.0. Procedia CIRP [Internet] 2018;72:622–8. Available from: https://doi.org/10.1016/j.procir.2018.03.292

Mendonça Júnior, Farid; Montenegro, Marcos; Thadani, Ramesh; Pedroso, Gisele A. C.; Oliveira MA de. Industry 4 . 0 as a way to enhance Lean Manufacturing and Six Sigma. Fifth Eur. Lean Educ. Conf. [Internet] 2018;152–60. Available from: http://www.elec2018.pt/

Sodhi H. When Industry 4.0 meets Lean Six Sigma: A review. Ind. Eng. J. 2020;13:1–12.


Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.